Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Flow [Max] | 15 gal/min |
| RPM [Max] | 585 rpm |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Seal Material | Buna-N |
| Port Type | NPTF |
| Series | H Series |
| Output Shaft Code | 27 |
| Port Size | 1/2-14 |
| Port Size & Location | 1/2 in NPTF Side |
| Duty | Corrosion Resistant-Duty |
| Material | Cast Iron |
| Mount Type | 4 Bolt |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Shaft Options | Nickel Plated |
| Special Features Hardware Code | 00 |
| Port Location | Side Port |
| Paint/Packaging | Environmental Coated Gloss White, Individual Box |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Flow Rate | 57 lpm |
| Paint Code | D |
| Bolt Circle Dia. | 3 1/4 in |
| Shaft Size & Type | Straight |
| Shaft Type | Straight w/ Woodruff Key, Corrosion Resistant |
| Inlet Pressure [Max] | 2500 psi |
| Pilot Diameter | 1.75 in |
| Splines | 0 |
| Displacement (in³/rev) | 5.9 |
| Case Drain | None |
| Pressure [Max] | 1800 psi |
| Case Drain Code | 0 |
| Special Features Assembly Code | 0 |
| Motor Element | Gerotor |
| Flange Orientation | Standard |
| Special Features | None |
| Port Code | B |
| Mounting Type Code | B |
| Motor Type | Spool Valve |
| Mounting Holes | 3/8-16 |
| RPM [Min] | 585 rpm |
| Rotation | Standard Rotation |
| Corrosion Resistant | Yes |
| Weight | 11.8 LB |
