Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Shaft Size & Type | Straight |
| Seal Material | Buna-N |
| Mount Type | 4 Bolt |
| Port Location | Side Port |
| Case Drain | None |
| Motor Element | Gerotor |
| Paint/Packaging | Environmental Coated Gloss White, Individual Box |
| Series | H Series |
| Pilot Diameter | 1.75 in |
| Motor Type | Spool Valve |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Flow Rate | 15 gal/min |
| Case Drain Code | 0 |
| Special Features Hardware Code | 00 |
| Port Type | NPTF |
| RPM [Min] | 585 rpm |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 5.9 |
| Bolt Circle Dia. | 3 1/4 in |
| Duty | Corrosion Resistant-Duty |
| Flange Orientation | Standard |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Corrosion Resistant | Yes |
| Mounting Hole Size | 3/8 in |
| Mounting Type Code | B |
| Shaft Type | Straight w/ Woodruff Key, Corrosion Resistant |
| Port Code | B |
| Special Features Assembly Code | 0 |
| Port Size & Location | 1/2 in NPTF Side |
| Splines | 0 |
| RPM [Max] | 585 rpm |
| Special Features | None |
| Flow [Max] | 15 gal/min |
| Output Shaft Code | 27 |
| Mounting Holes | 3/8-16 |
| Material | Cast Iron |
| Port Size | 1/2, 1/2-14 |
| Shaft Options | Nickel Plated |
| Paint Code | D |
| Inlet Pressure [Max] | 2500 psi |
| Pressure [Max] | 1800 psi |
| Weight | 11.8 LB |
