Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Pilot Diameter | 3.25 in |
| Displacement (in³/rev) | 2.2 |
| RPM [Min] | 1021 rpm |
| Special Features Hardware Code | AA |
| Case Drain Code | 0 |
| Output Shaft Code | 02 |
| Corrosion Resistant | No |
| Bolt Circle Dia. | 4.187 in |
| Port Size & Location | 1/2 in NPTF Side |
| Mounting Type Code | A |
| Port Type | NPTF |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Port Size | 1/2, 1/2-14 |
| Pressure [Max] | 1800 psi |
| Material | Cast Iron |
| Paint Code | A |
| Motor Element | Gerotor |
| RPM [Max] | 1021 rpm |
| Flow Rate | 9.5 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 496 in lb |
| Splines | 6 |
| Series | H Series |
| Duty | Standard-Duty |
| Mounting Holes | 0.535 in |
| Special Features Assembly Code | 0 |
| Mount Type | 2 Bolt |
| Seal Material | Buna-N |
| Geroter/Geroler Options | Free Running |
| Motor Type | Spool Valve |
| Port Code | B |
| Case Drain | None |
| Shaft Size & Type | 1 in - 6T Spline |
| Flow [Max] | 10 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Hole Size | 0.565 in |
| Special Features | Free Running Gerotor |
| Rotation | Standard Rotation |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Flange Orientation | Standard |
| Shaft Type | Splined |
| Port Location | Side Port |
| Weight | 11.2 LB |
