Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Duty | Standard-Duty |
| Pilot Diameter | 3.25 in |
| Output Shaft Code | 02 |
| Shaft Size & Type | 1 in - 6T Spline |
| Bolt Circle Dia. | 4.187 in |
| Splines | 6 |
| Mount Type | 2 Bolt |
| Mounting Type Code | A |
| Displacement (in³/rev) | 2.2 |
| Output Torque at Rated PSI (inch/pounds) | 496 in lb |
| Pressure [Max] | 1800 psi |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Port Location | Side Port |
| Flange Orientation | Standard |
| Case Drain | None |
| Special Features Hardware Code | AA |
| Seal Material | Buna-N |
| Case Drain Code | 0 |
| Mounting Holes | 0.535 in |
| Material | Cast Iron |
| RPM [Max] | 1021 rpm |
| Shaft Type | Splined |
| Port Size | 1/2, 1/2-14 |
| Inlet Pressure [Max] | 2500 psi |
| RPM [Min] | 1021 rpm |
| Flow Rate | 9.5 gal/min |
| Port Code | B |
| Rotation | Standard Rotation |
| Flow [Max] | 10 gal/min |
| Special Features | Free Running Gerotor |
| Motor Type | Spool Valve |
| Port Size & Location | 1/2 in NPTF Side |
| Port Type | NPTF |
| Series | H Series |
| Corrosion Resistant | No |
| Mounting Hole Size | 0.565 in |
| Special Features Assembly Code | 0 |
| Geroter/Geroler Options | Free Running |
| Motor Element | Gerotor |
| Paint Code | A |
| Weight | 11.2 LB |
