Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.58 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Shaft Type | Straight w/ Woodruff Key |
| Port Type | NPTF |
| Port Location | Side Port |
| Corrosion Resistant | No |
| Series | H Series |
| Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
| Mount Type | 2 Bolt |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Displacement (in³/rev) | 22.58 |
| Mounting Type Code | A |
| Motor Type | Spool Valve |
| Inlet Pressure [Max] | 2500 psi |
| Paint Code | A |
| Special Features Hardware Code | 00 |
| Rotation | Standard Rotation |
| Mounting Hole Size | 0.565 in |
| Port Size | 1/2, 1/2-14 |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Flange Orientation | Standard |
| Flow Rate | 14 gal/min |
| Motor Element | Gerotor |
| Mounting Holes | 0.535 in |
| Duty | Standard-Duty |
| Splines | 0 |
| Material | Cast Iron |
| Seal Material | Buna-N |
| Port Code | B |
| RPM [Max] | 152 rpm |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Pressure [Max] | 1250 psi |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Special Features Assembly Code | 0 |
| Output Shaft Code | 01 |
| Case Drain Code | 1 |
| Pilot Diameter | 3.25 in |
| Special Features | None |
| Flow [Max] | 15 gal/min |
| Bolt Circle Dia. | 4.187 in |
| RPM [Min] | 152 rpm |
| Port Size & Location | 1/2 in NPTF Side |
| Weight | 13.0 LB |
