Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Motor Type | Spool Valve |
| Flange Orientation | Standard |
| Flow Rate | 12 gal/min |
| Case Drain Code | 0 |
| Shaft Type | Straight w/ Woodruff Key |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mounting Type Code | A |
| Duty | Standard-Duty |
| Corrosion Resistant | No |
| Mount Type | 2 Bolt |
| Special Features Assembly Code | 0 |
| Bolt Circle Dia. | 4.19 in |
| Inlet Pressure [Max] | 2500 psi |
| Material | Cast Iron |
| RPM [Min] | 969 rpm |
| Seal Material | Buna-N |
| Port Size | SAE-8, 7/8-14 UNF |
| Paint Code | A |
| Flow [Max] | 12 gal/min |
| Rotation | Standard Rotation |
| Port Location | End Port |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Port Code | G |
| Pilot Diameter | 3.25 in |
| Special Features | None |
| Series | H Series |
| Displacement (in³/rev) | 2.8 |
| Motor Element | Gerotor |
| Mounting Holes | 0.535 in |
| Mounting Hole Size | 0.535 in |
| Pressure [Max] | 1800 psi |
| Splines | 0 |
| Case Drain | None |
| Special Features Hardware Code | 00 |
| RPM [Max] | 969 rpm |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Output Shaft Code | 01 |
| Port Type | SAE O-Ring |
| Weight | 13.0 LB |
