Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Series | H Series |
| Duty | Standard-Duty |
| Pressure [Max] | 1800 psi |
| Port Size | SAE-8, 7/8-14 UNF |
| Port Location | End Port |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Output Shaft Code | 01 |
| Corrosion Resistant | No |
| Shaft Type | Straight w/ Woodruff Key |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Port Type | SAE O-Ring |
| Displacement (in³/rev) | 2.8 |
| Flow [Max] | 12 gal/min |
| Mounting Holes | 0.535 in |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Motor Element | Gerotor |
| Rotation | Standard Rotation |
| Flange Orientation | Standard |
| Bolt Circle Dia. | 4.19 in |
| Case Drain | None |
| Case Drain Code | 0 |
| Mounting Hole Size | 0.535 in |
| RPM [Min] | 969 rpm |
| Material | Cast Iron |
| Seal Material | Buna-N |
| Special Features | None |
| Splines | 0 |
| Port Code | G |
| Mount Type | 2 Bolt |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Type Code | A |
| Special Features Hardware Code | 00 |
| Pilot Diameter | 3.25 in |
| RPM [Max] | 969 rpm |
| Special Features Assembly Code | 0 |
| Motor Type | Spool Valve |
| Paint Code | A |
| Flow Rate | 12 gal/min |
| Weight | 13.0 LB |
