Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Mounting Hole Size | 0.565 in |
| Special Features | None |
| Flow [Max] | 15 gal/min |
| Material | Cast Iron |
| Output Torque at Rated PSI (inch/pounds) | 2673 in lb |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Motor Type | Spool Valve |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Port Location | Side Port |
| Port Code | E |
| RPM [Min] | 243 rpm |
| Shaft Type | Straight |
| Displacement (in³/rev) | 14.1 |
| Series | H Series |
| Flange Orientation | Standard |
| Output Shaft Code | 24 |
| Pilot Diameter | 3.25 in |
| Mounting Holes | 0.535 in |
| Duty | Standard-Duty |
| Mounting Type Code | A |
| Case Drain Code | 2 |
| Special Features Hardware Code | 00 |
| Inlet Pressure [Max] | 2500 psi |
| Paint Code | A |
| Splines | 0 |
| Motor Element | Gerotor |
| Corrosion Resistant | No |
| Port Type | BSPP |
| Seal Material | Buna-N |
| RPM [Max] | 243 rpm |
| Port Size | 1/2, G 1/2 |
| Pressure [Max] | 1450 psi |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Mount Type | 2 Bolt |
| Flow Rate | 14 gal/min |
| Shaft Size & Type | Straight |
| Rotation | Standard Rotation |
| Bolt Circle Dia. | 4.187 in |
| Special Features Assembly Code | 0 |
| Weight | 13.0 LB |
