Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Port Size | 1/2, G 1/2 |
| Shaft Type | Straight |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Pressure [Max] | 1450 psi |
| Special Features Assembly Code | 0 |
| Pilot Diameter | 3.25 in |
| Rotation | Standard Rotation |
| Motor Element | Gerotor |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 2673 in lb |
| Flow [Max] | 15 gal/min |
| Shaft Size & Type | Straight |
| Inlet Pressure [Max] | 2500 psi |
| Series | H Series |
| Case Drain Code | 2 |
| Mounting Hole Size | 0.565 in |
| Port Type | BSPP |
| Displacement (in³/rev) | 14.1 |
| Port Location | Side Port |
| Mounting Type Code | A |
| Duty | Standard-Duty |
| Special Features | None |
| Motor Type | Spool Valve |
| Flow Rate | 14 gal/min |
| Port Code | E |
| RPM [Max] | 243 rpm |
| Mounting Holes | 0.535 in |
| Special Features Hardware Code | 00 |
| Output Shaft Code | 24 |
| Mount Type | 2 Bolt |
| Paint Code | A |
| Splines | 0 |
| RPM [Min] | 243 rpm |
| Flange Orientation | Standard |
| Material | Cast Iron |
| Corrosion Resistant | No |
| Seal Material | Buna-N |
| Bolt Circle Dia. | 4.187 in |
| Weight | 13.0 LB |
