Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 11.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Special Features Assembly Code | 0 |
| Corrosion Resistant | No |
| Port Location | Side Port |
| Displacement (in³/rev) | 11.3 |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 2345.45 in lb |
| Paint Code | A |
| Series | H Series |
| Shaft Size & Type | Straight |
| Seal Material | Buna-N |
| Port Code | E |
| Motor Type | Spool Valve |
| Port Type | BSPP |
| Flow [Max] | 15 gal/min |
| Shaft Type | Straight |
| Rotation | Standard Rotation |
| Special Features | None |
| Output Shaft Code | 24 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Size | 1/2, G 1/2 |
| RPM [Max] | 304 rpm |
| Flow Rate | 15 gal/min |
| Flange Orientation | Standard |
| Mounting Holes | 0.535 in |
| Duty | Standard-Duty |
| Splines | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Hardware Code | 00 |
| Pilot Diameter | 3.25 in |
| Material | Cast Iron |
| Bolt Circle Dia. | 4.19 in |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Mounting Type Code | A |
| RPM [Min] | 304 rpm |
| Case Drain Code | 2 |
| Mount Type | 2 Bolt |
| Motor Element | Gerotor |
| Mounting Hole Size | 0.535 in |
| Pressure [Max] | 1600 psi |
| Weight | 13.0 LB |
