Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 11.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Case Drain Code | 2 |
| Output Shaft Code | 24 |
| RPM [Max] | 304 rpm |
| Flange Orientation | Standard |
| Bolt Circle Dia. | 4.19 in |
| Rotation | Standard Rotation |
| Special Features Hardware Code | 00 |
| Motor Element | Gerotor |
| Special Features | None |
| Duty | Standard-Duty |
| Shaft Size & Type | Straight |
| Corrosion Resistant | No |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Motor Type | Spool Valve |
| Special Features Assembly Code | 0 |
| Mount Type | 2 Bolt |
| Material | Cast Iron |
| Flow [Max] | 15 gal/min |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Displacement (in³/rev) | 11.3 |
| Pilot Diameter | 3.25 in |
| Shaft Type | Straight |
| Port Code | E |
| Splines | 0 |
| Seal Material | Buna-N |
| Mounting Holes | 0.535 in |
| Flow Rate | 15 gal/min |
| Series | H Series |
| Port Type | BSPP |
| Inlet Pressure [Max] | 2500 psi |
| Output Torque at Rated PSI (inch/pounds) | 2345.45 in lb |
| Port Size | 1/2, G 1/2 |
| Mounting Type Code | A |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Port Location | Side Port |
| RPM [Min] | 304 rpm |
| Paint Code | A |
| Mounting Hole Size | 0.535 in |
| Pressure [Max] | 1600 psi |
| Weight | 13.0 LB |
