Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 11.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Bolt Circle Dia. | 3 1/4 in |
| Flange Orientation | Standard |
| Pilot Diameter | 1.75 in |
| Output Torque at Rated PSI (inch/pounds) | 2345.45 in lb |
| Motor Type | Spool Valve |
| Shaft Type | Tapered w/ Woodruff Key |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Paint Code | A |
| Case Drain Code | 0 |
| Port Size | SAE-8, 7/8-14 UNF |
| Case Drain | None |
| Port Code | G |
| Series | H Series |
| Output Shaft Code | 18 |
| Flow Rate | 15 gal/min |
| Seal Material | Buna-N |
| Flow [Max] | 15 gal/min |
| Mounting Holes | 3/8-16 |
| Mounting Hole Size | 3/8 in |
| Port Location | End Port |
| Displacement (in³/rev) | 11.3 |
| RPM [Max] | 304 rpm |
| Mount Type | 4 Bolt |
| Mounting Type Code | B |
| Viscocity (SUS) [Max] | 100 |
| Special Features Assembly Code | 0 |
| Shaft Size & Type | Tapered |
| Special Features | None |
| Rotation | Standard Rotation |
| Corrosion Resistant | No |
| Motor Element | Gerotor |
| Pressure [Max] | 1600 psi |
| Port Type | SAE O-Ring |
| Material | Cast Iron |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Size | 1 |
| Special Features Hardware Code | 00 |
| Splines | 0 |
| Duty | Standard-Duty |
| Weight | 13.0 LB |
