Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Flow [Max] | 15 gal/min |
| Mounting Hole Size | 0.535 in |
| Series | H Series |
| Paint Code | A |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Corrosion Resistant | No |
| Flange Orientation | Standard |
| Special Features Assembly Code | 1 |
| Rotation | Reverse Rotation |
| RPM [Min] | 152 rpm |
| Port Code | B |
| Seal Material | Buna-N |
| Pilot Diameter | 3.25 in |
| Special Features Hardware Code | AA |
| Geroter/Geroler Options | Free Running |
| Special Features | Free Running Gerotor |
| Case Drain | None |
| Motor Type | Spool Valve |
| Motor Element | Gerotor |
| Displacement (in³/rev) | 22.6 |
| RPM [Max] | 152 rpm |
| Port Size | 1/2, 1/2-14 |
| Mounting Type Code | A |
| Case Drain Code | 0 |
| Port Type | NPTF |
| Inlet Pressure [Max] | 2500 psi |
| Flow Rate | 15 gal/min |
| Material | Cast Iron |
| Shaft Type | Straight w/ Woodruff Key |
| Duty | Standard-Duty |
| Splines | 0 |
| Mounting Holes | 0.535 in |
| Port Location | Side Port |
| Output Shaft Code | 01 |
| Port Size & Location | 1/2 in NPTF Side |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Pressure [Max] | 1250 psi |
| Mount Type | 2 Bolt |
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Bolt Circle Dia. | 4.19 in |
| Weight | 13.0 LB |
