Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Duty | Standard-Duty |
| Case Drain | None |
| Flow [Max] | 15 gal/min |
| Shaft Type | Straight w/ Woodruff Key |
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Geroter/Geroler Options | Free Running |
| Output Shaft Code | 01 |
| Bolt Circle Dia. | 4.19 in |
| RPM [Min] | 152 rpm |
| Mounting Holes | 0.535 in |
| Pressure [Max] | 1250 psi |
| Port Type | NPTF |
| Flow Rate | 15 gal/min |
| Motor Type | Spool Valve |
| Port Size | 1/2, 1/2-14 |
| Splines | 0 |
| Mounting Hole Size | 0.535 in |
| Mounting Type Code | A |
| Special Features | Free Running Gerotor |
| Port Location | Side Port |
| Displacement (in³/rev) | 22.6 |
| RPM [Max] | 152 rpm |
| Pilot Diameter | 3.25 in |
| Port Size & Location | 1/2 in NPTF Side |
| Mount Type | 2 Bolt |
| Case Drain Code | 0 |
| Series | H Series |
| Corrosion Resistant | No |
| Seal Material | Buna-N |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Material | Cast Iron |
| Motor Element | Gerotor |
| Rotation | Reverse Rotation |
| Flange Orientation | Standard |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Code | B |
| Special Features Hardware Code | AA |
| Paint Code | A |
| Special Features Assembly Code | 1 |
| Inlet Pressure [Max] | 2500 psi |
| Weight | 13.0 LB |
