Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Size | 1/2, 1/2-14 |
| Pilot Diameter | 1.75 in |
| Port Size & Location | 1/2 in NPTF Side |
| Case Drain Code | 0 |
| Corrosion Resistant | No |
| Port Type | NPTF |
| Splines | 0 |
| Flow Rate | 15 gal/min |
| Special Features Hardware Code | 00 |
| Series | H Series |
| Flow [Max] | 15 gal/min |
| Case Drain | None |
| Paint Code | A |
| Motor Element | Gerotor |
| Rotation | Standard Rotation |
| Mounting Type Code | B |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| RPM [Max] | 585 rpm |
| Pressure [Max] | 1800 psi |
| Inlet Pressure [Max] | 2500 psi |
| Port Location | Side Port |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Seal Material | Buna-N |
| Mounting Holes | 3/8-16 |
| Flange Orientation | Standard |
| RPM [Min] | 585 rpm |
| Mounting Hole Size | 3/8 in |
| Special Features Assembly Code | 0 |
| Shaft Size & Type | Straight |
| Material | Cast Iron |
| Port Code | B |
| Motor Type | Spool Valve |
| Mount Type | 4 Bolt |
| Displacement (in³/rev) | 5.9 |
| Bolt Circle Dia. | 3 1/4 in |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Duty | Standard-Duty |
| Special Features | None |
| Shaft Type | Straight w/ Cross Hole |
| Output Shaft Code | 07 |
| Weight | 11.8 LB |
