Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| RPM [Min] | 585 rpm |
| Case Drain Code | 0 |
| Pressure [Max] | 1800 psi |
| Corrosion Resistant | No |
| Inlet Pressure [Max] | 2500 psi |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Hole Size | 3/8 in |
| RPM [Max] | 585 rpm |
| Pilot Diameter | 1.75 in |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Port Location | Side Port |
| Mounting Holes | 3/8-16 |
| Rotation | Standard Rotation |
| Port Type | NPTF |
| Bolt Circle Dia. | 3 1/4 in |
| Port Size & Location | 1/2 in NPTF Side |
| Special Features Hardware Code | 00 |
| Series | H Series |
| Mount Type | 4 Bolt |
| Motor Element | Gerotor |
| Shaft Type | Straight w/ Cross Hole |
| Special Features | None |
| Port Code | B |
| Splines | 0 |
| Special Features Assembly Code | 0 |
| Motor Type | Spool Valve |
| Flange Orientation | Standard |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Shaft Size & Type | Straight |
| Seal Material | Buna-N |
| Mounting Type Code | B |
| Displacement (in³/rev) | 5.9 |
| Port Size | 1/2, 1/2-14 |
| Case Drain | None |
| Flow [Max] | 15 gal/min |
| Material | Cast Iron |
| Duty | Standard-Duty |
| Output Shaft Code | 07 |
| Flow Rate | 15 gal/min |
| Paint Code | A |
| Weight | 11.8 LB |
