Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Type | SAE O-Ring |
| Mounting Holes | 0.535 in |
| Flow [Max] | 15 gal/min |
| Motor Type | Spool Valve |
| Port Size & Location | SAE-10 Side |
| Seal Material | Buna-N |
| Case Drain | None |
| Material | Cast Iron |
| Paint Code | A |
| Rotation | Standard Rotation |
| Special Features | None |
| RPM [Min] | 585 rpm |
| Case Drain Code | 0 |
| Special Features Hardware Code | 00 |
| Duty | Standard-Duty |
| Motor Element | Gerotor |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| Port Location | Side Port |
| Series | H Series |
| Pressure [Max] | 1800 psi |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Size & Type | Straight |
| Mount Type | 2 Bolt |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Bolt Circle Dia. | 4.19 in |
| Corrosion Resistant | No |
| Flow Rate | 15 gal/min |
| Port Code | A |
| Special Features Assembly Code | 0 |
| Splines | 0 |
| Shaft Type | Straight w/ Cross Hole |
| Output Shaft Code | 08 |
| Mounting Hole Size | 0.535 in |
| Pilot Diameter | 3.25 in |
| Flange Orientation | Standard |
| Displacement (in³/rev) | 5.9 |
| Port Size | SAE-10, 7/8-14 UNF |
| RPM [Max] | 585 rpm |
| Mounting Type Code | A |
| Weight | 11.8 LB |
