Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Displacement (in³/rev) | 5.9 |
| Special Features | None |
| Port Type | SAE O-Ring |
| Material | Cast Iron |
| Flow [Max] | 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Flow Rate | 15 gal/min |
| Motor Type | Spool Valve |
| Shaft Type | Straight w/ Cross Hole |
| Pressure [Max] | 1800 psi |
| Mount Type | 2 Bolt |
| RPM [Min] | 585 rpm |
| Series | H Series |
| Motor Element | Gerotor |
| Output Shaft Code | 08 |
| Mounting Hole Size | 0.535 in |
| Special Features Hardware Code | 00 |
| Port Size | SAE-10, 7/8-14 UNF |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Size & Location | SAE-10 Side |
| Duty | Standard-Duty |
| Mounting Holes | 0.535 in |
| Pilot Diameter | 3.25 in |
| Flange Orientation | Standard |
| Mounting Type Code | A |
| RPM [Max] | 585 rpm |
| Special Features Assembly Code | 0 |
| Port Code | A |
| Shaft Size & Type | Straight |
| Case Drain | None |
| Seal Material | Buna-N |
| Bolt Circle Dia. | 4.19 in |
| Case Drain Code | 0 |
| Rotation | Standard Rotation |
| Paint Code | A |
| Inlet Pressure [Max] | 2500 psi |
| Corrosion Resistant | No |
| Port Location | Side Port |
| Splines | 0 |
| Weight | 11.8 LB |
