Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Geroter/Geroler Options | Free Running |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Corrosion Resistant | No |
| Output Shaft Code | 01 |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features | Free Running Gerotor |
| Special Features Hardware Code | AA |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Hole Size | 0.535 in |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Pressure [Max] | 1650 psi |
| Splines | 0 |
| Case Drain | None |
| Flow Rate | 15 gal/min |
| Paint Code | A |
| Flange Orientation | Standard |
| Port Location | Side Port |
| Flow [Max] | 15 gal/min |
| Port Size & Location | 1/2 in NPTF Side |
| Port Code | B |
| Case Drain Code | 0 |
| Motor Type | Spool Valve |
| RPM [Max] | 353 rpm |
| Pilot Diameter | 3.25 in |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mounting Type Code | A |
| Duty | Standard-Duty |
| Port Type | NPTF |
| Port Size | 1/2, 1/2-14 |
| Inlet Pressure [Max] | 2500 psi |
| Seal Material | Buna-N |
| Rotation | Standard Rotation |
| Series | H Series |
| Mounting Holes | 0.535 in |
| Material | Cast Iron |
| Special Features Assembly Code | 0 |
| Mount Type | 2 Bolt |
| Bolt Circle Dia. | 4.19 in |
| Displacement (in³/rev) | 9.7 |
| Motor Element | Gerotor |
| Weight | 13.0 LB |
