Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Flow [Max] | 15 gal/min |
| Flange Orientation | Standard |
| Mount Type | 2 Bolt |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Pilot Diameter | 3.25 in |
| Pressure [Max] | 1800 psi |
| Material | Cast Iron |
| Mounting Hole Size | 0.535 in |
| Flow Rate | 15 gal/min |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Location | Side Port |
| Motor Type | Spool Valve |
| Inlet Pressure [Max] | 2500 psi |
| Rotation | Standard Rotation |
| Port Size & Location | 1/2 in NPTF Side |
| Shaft Type | Straight w/ Woodruff Key |
| Corrosion Resistant | No |
| Port Type | NPTF |
| RPM [Min] | 585 rpm |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Series | H Series |
| Displacement (in³/rev) | 5.9 |
| Paint Code | A |
| Output Shaft Code | 01 |
| Mounting Holes | 0.535 in |
| Motor Element | Gerotor |
| Bolt Circle Dia. | 4.19 in |
| Case Drain Code | 0 |
| Seal Material | Buna-N |
| Case Drain | None |
| RPM [Max] | 585 rpm |
| Port Code | B |
| Duty | Standard-Duty |
| Port Size | 1/2, 1/2-14 |
| Geroter/Geroler Options | Free Running |
| Splines | 0 |
| Special Features Assembly Code | 0 |
| Special Features Hardware Code | AA |
| Special Features | Free Running Gerotor |
| Mounting Type Code | A |
| Weight | 13.0 LB |
