
- Spool Motor
- Gerotor
- Spool Valve
- 1/2 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- SAE ports
- Splined and tapered shafts
Motor Type | Spool Valve |
Rotation | Standard Rotation |
Mounting Holes | 0.535 in |
Flow [Max] | 15 gal/min |
Flow Rate | 15 gal/min |
Corrosion Resistant | No |
Series | H Series |
Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
Seal Material | Buna-N |
Pressure [Max] | 1800 psi |
Case Drain Code | 0 |
Flange Orientation | Flange Rotated 90° |
Port Code | B |
Shaft Size & Type | 1 in x 1/4 in Straight |
Duty | Standard-Duty |
Port Location | Side Port |
Motor Element | Gerotor |
Paint/Packaging | Low Gloss Black, Individual Box |
Special Features Assembly Code | 2 |
Paint Code | A |
Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
Output Shaft Code | 01 |
Inlet Pressure [Max] | 2500 psi |
RPM [Max] | 585 rpm |
Splines | 0 |
Special Features Hardware Code | 00 |
Displacement (in³/rev) | 5.9 |
Port Size | 1/2 |
Port Type | NPTF |
Special Features | Flange Rotated 90° |
Mounting Type Code | A |
Bolt Circle Dia. | 4.19 in |
Port Size & Location | 1/2 in NPTF Side |
Mount Type | 2 Bolt |
Mounting Hole Size | 0.535 in |
Pilot Diameter | 3.25 in |
Case Drain | None |
Shaft Type | Straight w/ Woodruff Key |
Weight | 12.29 LB |
