Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- SAE ports
- Splined and tapered shafts
| Bolt Circle Dia. | 4.19 in |
| Rotation | Standard Rotation |
| Corrosion Resistant | No |
| Inlet Pressure [Max] | 2500 psi |
| Pilot Diameter | 3.25 in |
| Port Type | NPTF |
| Paint Code | A |
| Output Shaft Code | 01 |
| Splines | 0 |
| Mount Type | 2 Bolt |
| Seal Material | Buna-N |
| Special Features | None |
| Duty | Standard-Duty |
| Case Drain Code | 1 |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Port Code | B |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Shaft Type | Straight w/ Woodruff Key |
| Flow [Max] | 15 gal/min |
| Pressure [Max] | 1800 psi |
| Flow Rate | 57 lpm |
| Special Features Hardware Code | 00 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Motor Type | Spool Valve |
| Displacement (in³/rev) | 5.9 |
| Port Size | 1/2-14 |
| Port Location | Side Port |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flange Orientation | Standard |
| Material | Cast Iron |
| Special Features Assembly Code | 0 |
| Motor Element | Gerotor |
| RPM [Min] | 585 rpm |
| RPM [Max] | 585 rpm |
| Mounting Holes | 0.535 in |
| Mounting Type Code | A |
| Mounting Hole Size | 0.54 in |
| Port Size & Location | 1/2 in NPTF Side |
| Series | H Series |
| Weight | 13.0 LB |
