Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Series | H Series |
| Seal Material | Buna-N |
| Flow [Max] | 15 gal/min |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Port Type | NPTF |
| Duty | Standard-Duty |
| Mounting Hole Size | 0.535 in |
| Mounting Type Code | A |
| RPM [Max] | 585 rpm |
| Pressure [Max] | 1800 psi |
| Rotation | Standard Rotation |
| Special Features | None |
| Case Drain Code | 1 |
| Shaft Type | Straight w/ Woodruff Key |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Inlet Pressure [Max] | 2500 psi |
| Motor Type | Spool Valve |
| Special Features Hardware Code | 00 |
| Bolt Circle Dia. | 4.19 in |
| Flange Orientation | Standard |
| Mount Type | 2 Bolt |
| Mounting Holes | 0.535 in |
| Output Shaft Code | 01 |
| Port Size | 1/2, 1/2-14 |
| Port Code | B |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Special Features Assembly Code | 0 |
| Motor Element | Gerotor |
| Material | Cast Iron |
| Displacement (in³/rev) | 5.9 |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Port Location | Side Port |
| Flow Rate | 15 gal/min |
| Paint Code | A |
| Pilot Diameter | 3.25 in |
| Port Size & Location | 1/2 in NPTF Side |
| Splines | 0 |
| Corrosion Resistant | No |
| RPM [Min] | 585 rpm |
| Weight | 13.0 LB |
