
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 17.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
Flange Orientation | Standard |
Port Size | SAE-10, 7/8-14 UNF |
Rotation | Standard Rotation |
Displacement (in³/rev) | 17.9 |
Special Features Hardware Code | 00 |
Pressure [Max] | 1350 psi |
Series | H Series |
Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
Material | Cast Iron |
Special Features Assembly Code | 0 |
Shaft Size & Type | 1 in - 6T Spline |
Mount Type | 2 Bolt |
Port Location | Side Port |
Mounting Holes | 0.535 in |
Corrosion Resistant | No |
Motor Type | Spool Valve |
RPM [Max] | 192 rpm |
Special Features | None |
Motor Element | Gerotor |
Flow [Max] | 15 gal/min |
Inlet Pressure [Max] | 2500 psi |
Bolt Circle Dia. | 4.19 in |
Mounting Hole Size | 0.535 in |
Paint Code | A |
Port Type | SAE O-Ring |
Pilot Diameter | 3.25 in |
Case Drain Code | 0 |
Shaft Type | Splined |
Flow Rate | 15 gal/min |
Paint/Packaging | Low Gloss Black, Individual Box |
Port Code | A |
Output Torque at Rated PSI (inch/pounds) | 150.46 in lb |
Port Size & Location | SAE-10 Side |
Seal Material | Buna-N |
Output Shaft Code | 02 |
Duty | Standard-Duty |
Splines | 6 |
Case Drain | None |
Mounting Type Code | A |
Weight | 14.0 LB |
