
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 17.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
Pressure [Max] | 1350 psi |
Port Size | SAE-10, 7/8-14 UNF |
Mount Type | 2 Bolt |
Splines | 6 |
Mounting Type Code | A |
Special Features | None |
Shaft Size & Type | 1 in - 6T Spline |
Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
Material | Cast Iron |
Paint Code | A |
Bolt Circle Dia. | 4.19 in |
Duty | Standard-Duty |
Special Features Hardware Code | 00 |
Displacement (in³/rev) | 17.9 |
Special Features Assembly Code | 0 |
Motor Type | Spool Valve |
Flow [Max] | 15 gal/min |
Mounting Holes | 0.535 in |
Case Drain Code | 0 |
Port Size & Location | SAE-10 Side |
Flange Orientation | Standard |
RPM [Max] | 192 rpm |
Inlet Pressure [Max] | 2500 psi |
Port Code | A |
Case Drain | None |
Port Type | SAE O-Ring |
Flow Rate | 15 gal/min |
Shaft Type | Splined |
Port Location | Side Port |
Corrosion Resistant | No |
Series | H Series |
Seal Material | Buna-N |
Pilot Diameter | 3.25 in |
Motor Element | Gerotor |
Mounting Hole Size | 0.535 in |
Output Shaft Code | 02 |
Rotation | Standard Rotation |
Paint/Packaging | Low Gloss Black, Individual Box |
Output Torque at Rated PSI (inch/pounds) | 150.46 in lb |
Weight | 14.0 LB |
