Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 SAE O-Ring Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Code | A |
| Corrosion Resistant | No |
| Series | H Series |
| Material | Cast Iron |
| Shaft Type | Splined |
| RPM [Min] | 760 rpm |
| RPM [Max] | 760 rpm |
| Rotation | Standard Rotation |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Special Features Assembly Code | 0 |
| Paint Code | A |
| Motor Type | Spool Valve |
| Mounting Type Code | A |
| Shaft Size & Type | 1 in - 6T Spline |
| Port Type | SAE O-Ring |
| Seal Material | Buna-N |
| Port Size | SAE-10, 7/8-14 |
| Flow Rate | 15 gal/min |
| Mount Type | 2 Bolt |
| Port Location | Side Port |
| Duty | Standard-Duty |
| Flow [Max] | 15 gal/min |
| Port Size & Location | SAE-10 Side |
| Mounting Hole Size | 0.535 in |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Case Drain Code | 0 |
| Splines | 6 |
| Pressure [Max] | 1800 psi |
| Mounting Holes | 0.535 in |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Motor Element | Gerotor |
| Special Features Hardware Code | 00 |
| Pilot Diameter | 3.25 in |
| Bolt Circle Dia. | 4.19 in |
| Output Shaft Code | 02 |
| Displacement (in³/rev) | 4.5 |
| Flange Orientation | Standard |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain | None |
| Special Features | None |
| Weight | 11.5 LB |
