Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 SAE O-Ring Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Mounting Type Code | A |
| Paint Code | A |
| Displacement (in³/rev) | 4.5 |
| Splines | 6 |
| Port Type | SAE O-Ring |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Pressure [Max] | 1800 psi |
| Port Size | SAE-10, 7/8-14 |
| Seal Material | Buna-N |
| Rotation | Standard Rotation |
| Output Shaft Code | 02 |
| Inlet Pressure [Max] | 2500 psi |
| Motor Type | Spool Valve |
| RPM [Max] | 760 rpm |
| Flange Orientation | Standard |
| Special Features | None |
| Mount Type | 2 Bolt |
| Shaft Type | Splined |
| RPM [Min] | 760 rpm |
| Case Drain | None |
| Duty | Standard-Duty |
| Port Size & Location | SAE-10 Side |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Case Drain Code | 0 |
| Shaft Size & Type | 1 in - 6T Spline |
| Motor Element | Gerotor |
| Bolt Circle Dia. | 4.19 in |
| Special Features Assembly Code | 0 |
| Pilot Diameter | 3.25 in |
| Port Code | A |
| Series | H Series |
| Flow [Max] | 15 gal/min |
| Special Features Hardware Code | 00 |
| Flow Rate | 15 gal/min |
| Mounting Holes | 0.535 in |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Mounting Hole Size | 0.535 in |
| Corrosion Resistant | No |
| Material | Cast Iron |
| Port Location | Side Port |
| Weight | 11.5 LB |
