Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 11.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Special Features Hardware Code | 00 |
| Material | Cast Iron |
| Motor Type | Spool Valve |
| Flow [Max] | 15 gal/min |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 2345.45 in lb |
| Series | H Series |
| Mounting Holes | 0.535 in |
| Shaft Type | Splined |
| Splines | 6 |
| Case Drain Code | 0 |
| Flow Rate | 57 lpm |
| Mounting Type Code | A |
| Motor Element | Gerotor |
| Port Code | B |
| Port Type | NPTF |
| Mount Type | 2 Bolt |
| Port Location | Side Port |
| Flange Orientation | Standard |
| Bolt Circle Dia. | 4.19 in |
| Seal Material | Buna-N |
| Special Features | None |
| Paint Code | A |
| Pilot Diameter | 3.25 in |
| RPM [Max] | 304 rpm |
| Shaft Size & Type | 1 in - 6T Spline |
| Case Drain | None |
| Output Shaft Code | 02 |
| Duty | Standard-Duty |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Displacement (in³/rev) | 11.3 |
| Port Size & Location | 1/2 in NPTF Side |
| RPM [Min] | 304 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Corrosion Resistant | No |
| Port Size | 1/2-14 |
| Pressure [Max] | 1600 psi |
| Special Features Assembly Code | 0 |
| Rotation | Standard Rotation |
| Mounting Hole Size | 0.54 in |
| Weight | 12.8 LB |
