Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Case Drain Code | 0 |
| Special Features | None |
| Port Size & Location | SAE-10 Side |
| Pilot Diameter | 1.75 in |
| Port Code | A |
| Case Drain | None |
| Flow [Max] | 15 gal/min |
| Special Features Assembly Code | 0 |
| Material | Cast Iron |
| Mounting Holes | 3/8-16 |
| Bolt Circle Dia. | 3 1/4 in |
| Series | H Series |
| Inlet Pressure [Max] | 2500 psi |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Splines | 6 |
| Port Size | SAE-10, 7/8-14 UNF |
| Seal Material | Buna-N |
| Flow Rate | 15 gal/min |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Shaft Type | Splined |
| Corrosion Resistant | No |
| Port Location | Side Port |
| Shaft Size & Type | 1 in - 6T Spline |
| Mount Type | 4 Bolt |
| Motor Element | Gerotor |
| Motor Type | Spool Valve |
| Flange Orientation | Standard |
| Mounting Hole Size | 3/8 in |
| RPM [Max] | 152 rpm |
| Displacement (in³/rev) | 22.6 |
| Paint Code | A |
| Special Features Hardware Code | 00 |
| Rotation | Standard Rotation |
| Mounting Type Code | B |
| Port Type | SAE O-Ring |
| Duty | Standard-Duty |
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Output Shaft Code | 02 |
| Pressure [Max] | 1250 psi |
| Weight | 14.7 LB |
