Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Flow [Max] | 15 gal/min |
| Mount Type | 4 Bolt |
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Mounting Hole Size | 3/8 in |
| Duty | Standard-Duty |
| Port Type | SAE O-Ring |
| Motor Type | Spool Valve |
| RPM [Max] | 152 rpm |
| Displacement (in³/rev) | 22.6 |
| Output Shaft Code | 02 |
| Port Code | A |
| Shaft Type | Splined |
| Shaft Size & Type | 1 in - 6T Spline |
| Material | Cast Iron |
| Case Drain | None |
| Series | H Series |
| Motor Element | Gerotor |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Bolt Circle Dia. | 3 1/4 in |
| Flange Orientation | Standard |
| Mounting Holes | 3/8-16 |
| Port Location | Side Port |
| Port Size & Location | SAE-10 Side |
| Inlet Pressure [Max] | 2500 psi |
| Seal Material | Buna-N |
| Flow Rate | 15 gal/min |
| Case Drain Code | 0 |
| Pressure [Max] | 1250 psi |
| Special Features | None |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Rotation | Standard Rotation |
| Special Features Assembly Code | 0 |
| Splines | 6 |
| Port Size | SAE-10, 7/8-14 UNF |
| Mounting Type Code | B |
| Pilot Diameter | 1.75 in |
| Corrosion Resistant | No |
| Paint Code | A |
| Special Features Hardware Code | 00 |
| Weight | 14.7 LB |
