Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Material | Cast Iron |
| Splines | 6 |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Motor Type | Spool Valve |
| Case Drain Code | 0 |
| Port Location | Side Port |
| Flow [Max] | 15 gal/min |
| RPM [Max] | 152 rpm |
| Special Features Hardware Code | 00 |
| Series | H Series |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Type Code | B |
| Shaft Type | Splined |
| Output Shaft Code | 02 |
| Shaft Size & Type | 1 in - 6T Spline |
| Motor Element | Gerotor |
| Port Type | NPTF |
| Case Drain | None |
| Corrosion Resistant | No |
| Port Size | 1/2, 1/2-14 |
| Pressure [Max] | 1250 psi |
| Port Size & Location | 1/2 in NPTF Side |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 22.6 |
| Mounting Hole Size | 3/8 in |
| Bolt Circle Dia. | 3 1/4 in |
| Special Features Assembly Code | 0 |
| Mounting Holes | 3/8-16 |
| Special Features | None |
| Flange Orientation | Standard |
| RPM [Min] | 152 rpm |
| Pilot Diameter | 1.75 in |
| Paint Code | A |
| Duty | Standard-Duty |
| Flow Rate | 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Mount Type | 4 Bolt |
| Port Code | B |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Seal Material | Buna-N |
| Weight | 14.7 LB |
