Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Type | NPTF |
| Port Size & Location | 1/2 in NPTF Side |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Corrosion Resistant | No |
| Inlet Pressure [Max] | 2500 psi |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Motor Element | Gerotor |
| Rotation | Standard Rotation |
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Output Shaft Code | 02 |
| Port Location | Side Port |
| Port Code | B |
| Shaft Size & Type | 1 in - 6T Spline |
| Pressure [Max] | 1250 psi |
| Port Size | 1/2, 1/2-14 |
| Flange Orientation | Standard |
| Splines | 6 |
| Material | Cast Iron |
| Mount Type | 4 Bolt |
| Mounting Holes | 3/8-16 |
| Displacement (in³/rev) | 22.6 |
| Duty | Standard-Duty |
| Seal Material | Buna-N |
| Paint Code | A |
| Series | H Series |
| Special Features | None |
| Flow [Max] | 15 gal/min |
| Special Features Hardware Code | 00 |
| Flow Rate | 15 gal/min |
| Mounting Hole Size | 3/8 in |
| Case Drain | None |
| Mounting Type Code | B |
| Bolt Circle Dia. | 3 1/4 in |
| Case Drain Code | 0 |
| Motor Type | Spool Valve |
| Pilot Diameter | 1.75 in |
| RPM [Max] | 152 rpm |
| Special Features Assembly Code | 0 |
| RPM [Min] | 152 rpm |
| Shaft Type | Splined |
| Weight | 14.7 LB |
