Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Special Features | None |
| Material | Cast Iron |
| Case Drain Code | 0 |
| Output Torque at Rated PSI (inch/pounds) | 2672.92 in lb |
| Special Features Hardware Code | 00 |
| Shaft Size & Type | 1 in - 6T Spline |
| Port Type | NPTF |
| Motor Element | Gerotor |
| Port Size | 1/2, 1/2-14 |
| Flow Rate | 15 gal/min |
| RPM [Min] | 243 rpm |
| Corrosion Resistant | No |
| Port Size & Location | 1/2 in NPTF Side |
| Output Shaft Code | 02 |
| Mount Type | 4 Bolt |
| Mounting Type Code | B |
| Flange Orientation | Standard |
| Flow [Max] | 15 gal/min |
| Displacement (in³/rev) | 14.1 |
| Port Location | Side Port |
| Port Code | B |
| Duty | Standard-Duty |
| Inlet Pressure [Max] | 2500 psi |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Paint Code | A |
| Mounting Hole Size | 3/8 in |
| Shaft Type | Splined |
| RPM [Max] | 243 rpm |
| Seal Material | Buna-N |
| Case Drain | None |
| Rotation | Standard Rotation |
| Mounting Holes | 3/8-16 |
| Pressure [Max] | 1450 psi |
| Special Features Assembly Code | 0 |
| Series | H Series |
| Motor Type | Spool Valve |
| Pilot Diameter | 1.75 in |
| Splines | 6 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Bolt Circle Dia. | 3 1/4 in |
| Weight | 13.3 LB |
