Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Special Features Assembly Code | 0 |
| Motor Type | Spool Valve |
| Bolt Circle Dia. | 3 1/4 in |
| Special Features | None |
| Shaft Size & Type | 1 in - 6T Spline |
| Rotation | Standard Rotation |
| Mounting Holes | 3/8-16 |
| Port Location | Side Port |
| Port Code | B |
| Duty | Standard-Duty |
| RPM [Min] | 243 rpm |
| Seal Material | Buna-N |
| Displacement (in³/rev) | 14.1 |
| Mounting Hole Size | 3/8 in |
| Port Size & Location | 1/2 in NPTF Side |
| Port Type | NPTF |
| Output Torque at Rated PSI (inch/pounds) | 2672.92 in lb |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Splines | 6 |
| Shaft Type | Splined |
| Series | H Series |
| Port Size | 1/2, 1/2-14 |
| RPM [Max] | 243 rpm |
| Corrosion Resistant | No |
| Case Drain | None |
| Flow Rate | 15 gal/min |
| Motor Element | Gerotor |
| Mount Type | 4 Bolt |
| Special Features Hardware Code | 00 |
| Inlet Pressure [Max] | 2500 psi |
| Flow [Max] | 15 gal/min |
| Output Shaft Code | 02 |
| Paint Code | A |
| Pilot Diameter | 1.75 in |
| Material | Cast Iron |
| Case Drain Code | 0 |
| Pressure [Max] | 1450 psi |
| Flange Orientation | Standard |
| Mounting Type Code | B |
| Weight | 13.3 LB |
