Find a Service Center
Alternate Products
- 20 mm Shaft, 31.75 mm Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Base Length | 127 mm |
| End Type | Open End |
| Bolt Holes | 2 |
| Housing Height | 62.7 mm |
| Bolt Hole Spacing Range [Max] | 155.8000 mm |
| Housing Construction | 1 Piece |
| Shaft Dia. | 20 mm |
| Insert Type | Steel Insert |
| Base Width | 31.8 mm |
| Base Height | 11.9 mm |
| Bolt Size | M10 |
| Pillow Block Type | Thru-Bolt |
| Collar O.D. | 27.56 mm |
| Bearing Type | Ball Bearing |
| Mounted Unit Duty | Normal-Duty |
| Series | YAK Series |
| Overall Width | 34.13 mm |
| Housing Material | Cast Iron |
| Seal Type | Contact Seals |
| Length Through Bore | 30.9 mm |
| Lubrication | Relubricatable |
| Bolt Hole Spacing | 96 mm |
| Bearing Insert | GYE20KRRB |
| Locking Device | Setscrew Locking Collar |
| Inch/Metric | Metric |
| Bolt Hole Spacing Range [Min] | 76.2000 mm |
| Bearing Design | Non-Expansion |
| Weight | 1.494 LB |
| EAN or UPC | 87796169623 |
