Find a Service Center
- Single Row Radial Bearing, 0.375" ID x 0.875" OD x 9/32" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| I.D. | 3/8 in |
| Cage Material | Steel |
| Material | Steel |
| Open Width | 7/32 in |
| Radial Internal Clearance | C3 |
| Rows of Balls | Single |
| Seal Type | Non-Contact Seals |
| Origin | Single Row Radial |
| Precision | Standard |
| No. in Set | Single Bearing |
| Closed Width | 9/32 in |
| Snap Ring | No Snap Ring |
| icNumber | 7695900 |
| Enclosure | Double Shielded |
| Bearing Type | Radial |
| Outer Ring Width | 9/32 in |
| Seal Material | Metal |
| Temperature Range [Max] | 275 °F |
| Locking Device | No Locking Device |
| O.D. Type | Straight |
| Fillet Radius | 0.016 in |
| Bore Type | Round Bore |
| Capacity | Standard Capacity |
| Temperature Range [Min] | -30 °F |
| Cage Type | Metal |
| Static Load Rating [Max] | 312.00 lbf |
| O.D. | 7/8 in |
| Width | 9/32 in |
| Precision Level | Standard (ABEC 1) |
| Lubricant | Polyurea Base |
| Ball Material | Steel |
| Inch/Metric | Inch Bore |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Preload Level | None |
| Dynamic Load Rating | 830.00 lbf |
| Contact Angle | 0° |
| Inner Ring Width | 9/32 in |
| Weight | 0.17 LB |
| EAN or UPC | 87796044227 |
| NSN Number | 3110-00-175-1120 |
