Find a Service Center
- Single Row Radial Bearing, 0.25" ID x 0.75" OD x 0.196" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Material | Steel |
| Static Load Rating [Max] | 125.00 lbf |
| Dynamic Load Rating | 365.00 lbf |
| Enclosure | Double Shielded |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Origin | Single Row Radial |
| Capacity | Standard Capacity |
| Rows of Balls | Single |
| Outer Ring Width | 0.196 in |
| Open Width | 0.196 in |
| Seal Material | Metal |
| Precision | Standard |
| Closed Width | 0.196 in |
| Cage Type | Metal |
| Lubricant | Polyurea Base |
| Locking Device | No Locking Device |
| Bore Type | Round Bore |
| O.D. Type | Straight |
| Temperature Range [Max] | 275 °F |
| Fillet Radius | 0.012 in |
| Width | 0.196 in |
| O.D. | 5/8 in |
| Contact Angle | 0° |
| Ball Material | Steel |
| Snap Ring | No Snap Ring |
| Preload Level | None |
| Cage Material | Steel |
| Radial Internal Clearance | C3 |
| icNumber | 7695899 |
| Bearing Type | Radial |
| No. in Set | Single Bearing |
| I.D. | 1/4 in |
| Temperature Range [Min] | -30 °F |
| Inner Ring Width | 0.196 in |
| Precision Level | Standard (ABEC 1) |
| Inch/Metric | Inch Bore |
| Seal Type | Non-Contact Seals |
| Weight | 0.16 LB |
| EAN or UPC | 87796044166 |
| NSN Number | 3110-00-134-0190, 3110-00-227-4521, 3110-00-470-9147, 3110-00-494-4480 |
