Find a Service Center
- Single Row Radial Bearing, 1.25" ID x 2.25" OD x 0.375" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Material | Steel |
| Seal Material | None |
| Lubricant | Oil Preservative |
| Contact Angle | 0° |
| No. in Set | Single Bearing |
| Capacity | Standard Capacity |
| Precision Level | Standard (ABEC 1) |
| Radial Internal Clearance | C3 |
| Inner Ring Width | 3/8 in |
| Enclosure | Open |
| Cage Type | Metal |
| Static Load Rating [Max] | 1340 lbf |
| Inch/Metric | Inch Bore |
| Fillet Radius | 0.031 in |
| Seal Type | Unsealed |
| Outer Ring Width | 3/8 in |
| Pre Lubricant | None |
| I.D. | 1 1/4 in |
| icNumber | 7697582 |
| Bearing Type | Radial |
| Rows of Balls | Single |
| Precision | Standard |
| Ball Material | Steel |
| Width | 3/8 in |
| Snap Ring | No Snap Ring |
| O.D. Type | Straight |
| Origin | Single Row Radial |
| Cage Material | Steel |
| Preload Level | None |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Bore Type | Round Bore |
| O.D. | 2.25 in |
| Locking Device | No Locking Device |
| Dynamic Load Rating | 2750 lbf |
| Weight | 0.22 LB |
| EAN or UPC | 87796040472 |
| NSN Number | 3110-00-554-2917, 3110-00-812-3605 |
