Find a Service Center
- Single Row Radial Bearing, 1" ID x 2" OD x 0.5" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| icNumber | 7696984 |
| Bore Type | Round Bore |
| Material | Steel |
| Lubricant | Polyurea Base |
| Precision Level | Standard (ABEC 1) |
| Width | 1/2 in |
| Origin | Single Row Radial |
| Rows of Balls | Single |
| Precision | Standard |
| Bearing Type | Radial |
| Temperature Range [Max] | 275 °F |
| O.D. Type | Straight |
| Snap Ring | No Snap Ring |
| Ball Material | Steel |
| Enclosure | Double Shielded |
| No. in Set | Single Bearing |
| Preload Level | None |
| Seal Type | Non-Contact Seals |
| Temperature Range [Min] | -30 °F |
| Seal Material | Metal |
| Dynamic Load Rating | 2,500.00 lbf |
| Radial Internal Clearance | C3 |
| Capacity | Standard Capacity |
| Inner Ring Width | 1/2 in |
| Static Load Rating [Max] | 1,120.00 lbf |
| Fillet Radius | 0.031 in |
| Open Width | 3/8 in |
| Contact Angle | 0° |
| I.D. | 1 in |
| Cage Type | Metal |
| Locking Device | No Locking Device |
| Outer Ring Width | 1/2 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Inch/Metric | Inch Bore |
| O.D. | 2 in |
| Closed Width | 1/2 in |
| Cage Material | Steel |
| Weight | 0.198 LB |
| EAN or UPC | 87796044821 |
| NSN Number | 3110-00-155-8894 |
