Find a Service Center
- Single Row Radial Bearing (Stainless), 0.375" ID x 0.875" OD x 0.28125" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Temperature Range [Max] | 275 °F |
| Lubricant | Polyurea Base |
| Outer Ring Width | 9/32 in |
| Bore Type | Round Bore |
| Fillet Radius | 0.016 in |
| Preload Level | None |
| Temperature Range [Min] | -30 °F |
| Cage Material | Steel |
| Seal Material | Metal |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Bearing Type | Radial |
| Ball Material | Steel |
| Static Load Rating [Max] | 312 lbf |
| Snap Ring | No Snap Ring |
| Origin | Single Row Radial |
| Width | 9/32 in |
| Precision Level | Standard (ABEC 1) |
| icNumber | 7700552 |
| Precision | Standard |
| O.D. Type | Straight |
| Locking Device | No Locking Device |
| Capacity | Standard Capacity |
| Rows of Balls | Single |
| Inch/Metric | Inch Bore |
| Seal Type | Non-Contact Seals |
| Dynamic Load Rating | 830 lbf |
| I.D. | 3/8 in |
| Material | Stainless Steel |
| Contact Angle | 0° |
| Radial Internal Clearance | C3 |
| No. in Set | Single Bearing |
| Enclosure | Double Shielded |
| Cage Type | Metal |
| Inner Ring Width | 9/32 in |
| O.D. | 0.875 in |
| Weight | 0.03 LB |
| EAN or UPC | 87796074064 |
| NSN Number | 3110-00-141-9783, 3110-00-249-0636 |
