- Single Row Radial Bearing, 0.1875" ID x 0.5" OD x 0.156" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Locking Device | No Locking Device |
| Contact Angle | 0° |
| Capacity | Standard Capacity |
| Lubricant | Oil Preservative |
| Static Load Rating [Max] | 110.00 lbf |
| Width | 5/32 in |
| Rows of Balls | Single |
| Preload Level | None |
| Precision | Standard |
| Dynamic Load Rating | 325.00 lbf |
| Origin | Single Row Radial |
| Cage Material | Steel |
| Cage Type | Metal |
| Closed Width | 0.196 in |
| Bearing Type | Radial |
| Fillet Radius | 0.012 in |
| Ball Material | Steel |
| Radial Internal Clearance | C3 |
| Pre Lubricant | None |
| icNumber | 7696399 |
| Inner Ring Width | 5/32 in |
| Seal Type | Unsealed |
| Precision Level | Standard (ABEC 1) |
| Open Width | 5/32 in |
| Inch/Metric | Inch Bore |
| No. in Set | Single Bearing |
| Enclosure | Open |
| O.D. Type | Straight |
| O.D. | 1/2 in |
| Snap Ring | No Snap Ring |
| Material | Steel |
| Bore Type | Round Bore |
| I.D. | 3/16 in |
| Outer Ring Width | 5/32 in |
| Seal Material | None |
| Weight | 0.16 LB |
| EAN or UPC | 87796044432 |
| NSN Number | 3110-00-289-8084 |

