Find a Service Center
- Single Row Radial Bearing, 45 mm ID x 85 mm OD x 27 mm Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- The 200 series R-Seal type consists of deep groove, Conrad type bearings which incorporate a flare-out, contact R Seal.In this design a synthetic rubber impregnated washer is enclosed between two metal shields to give unsurpassed protection against contaminiants. Because of the heavy contact seal, this series is normally employed in moderate speed service.
| Fillet Radius | 0.039 in |
| No. in Set | Single Bearing |
| Enclosure | Double Sealed |
| Bore Type | Round Bore |
| Inch/Metric | Metric Bore |
| I.D. | 45 mm |
| Outer Ring Width | 21 mm |
| Seal Material | Rubber |
| Bearing Type | Radial |
| Radial Internal Clearance | C3 |
| Dynamic Load Rating | 8300 lbf |
| Capacity | Standard Capacity |
| Precision | Standard |
| Origin | Wide Inner Ring |
| Static Load Rating [Max] | 4550 lbf |
| Temperature Range [Min] | -30 °F |
| Temperature Range [Max] | 275 °F |
| Seal O.D. | 2.851 mm |
| O.D. Type | Straight |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| O.D. | 85 mm |
| Material | Steel |
| Seal Type | Contact Seals |
| Snap Ring | No Snap Ring |
| Cage Type | Metal |
| Rows of Balls | Single |
| Seal Protection Width | 0.952 in |
| icNumber | 7701308 |
| Lubricant | Polyurea Base |
| Preload Level | None |
| Inner Ring Width | 27 mm |
| Contact Angle | 0° |
| Cage Material | Steel |
| Inner Ring O.D. | 2.279 in |
| Ball Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Locking Device | No Locking Device |
| Weight | 1.036 LB |
| EAN or UPC | 87796041530 |
