Find a Service Center
- Radial Shaft Seal
- 660.4 mm Shaft Diameter
- 723.9 mm Housing Bore Diameter
- 22.23 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Temperature Range [Min] | -40 °F |
| Shaft Dia. | 660.4 mm |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.093 |
| Spring Material | Carbon Steel Garter |
| Cover/Compensation Ring/Plate Required | No |
| Seal Application | General Purpose |
| Inch/Metric | Metric |
| Temperature Range [Max] | 225 °F |
| Case Construction | Steel Case w/Inner Case w/4 Lugs |
| Pressure | 10 psi |
| Construction | HDS1 |
| Lip Style | Internal |
| Lip Type | Non-Split |
| Surface Speed [Nom] | 5,000 ft/min |
| Lip Material | Nitrile |
| Housing Bore Dia. | 723.9 mm |
| Seal Design | Bonded Design |
| Weight | 10.572 LB |
| EAN or UPC | 85311140560 |
