Find a Service Center
- Radial Shaft Seal
- 404.83 mm Shaft Diameter
- 439.75 mm Housing Bore Diameter
- 15.88 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Seal Design | Bonded Design |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Construction | HDS1 |
| Lip Type | Non-Split |
| Case Construction | Steel Case w/Inner Case |
| Lip Style | Internal |
| Inch/Metric | Metric |
| Temperature Range [Min] | -40 °F |
| Temperature Range [Max] | 250 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Housing Bore Dia. | 439.75 mm |
| Spring Material | Carbon Steel Garter |
| Shaft Dia. | 404.83 mm |
| Surface Speed [Nom] | 5,000 ft/min |
| Pressure | 10 psi |
| Temp Description | w/4 Lugs |
| Lip Material | Nitrile |
| Weight | 5.873 LB |
| EAN or UPC | 85311127561 |
