Find a Service Center
- Radial Shaft Seal
- 349.25 mm Shaft Diameter
- 393.7 mm Housing Bore Diameter
- 22.23 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Seal Design | Bonded Design |
| Seal Application | Dirt Exclusion and Lubricant Retention |
| Housing Bore Dia. | 393.7 mm |
| Lip Style | Internal |
| Inch/Metric | Metric |
| Pressure | 15 psi |
| Lip Type | Non-Split |
| Spring Material | Carbon Steel Garter |
| Construction | HDSA1 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Case Construction | Steel Case w/Inner Case |
| Shaft Dia. | 349.25 mm |
| Lip Material | Duralip (Carboxylated Nitrile), Fluoroelastomer - Viton |
| Surface Speed [Nom] | 5,000 ft/min |
| Temperature Range [Max] | 250 °F |
| Temperature Range [Min] | -40 °F |
| Cover/Compensation Ring/Plate Required | No |
| Weight | 5.694 LB |
| EAN or UPC | 85311885799 |
