Find a Service Center
- Radial Shaft Seal
- 342.9 mm Shaft Diameter
- 400.1 mm Housing Bore Diameter
- 25.4 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Lip Type | Non-Split |
| Construction | HDS1 |
| Spring Material | Carbon Steel Garter |
| Lip Material | Nitrile |
| Case Construction | Steel Case w/Inner Case |
| Temperature Range [Min] | -40 °F |
| Lip Style | Internal |
| Inch/Metric | Metric |
| Temperature Range [Max] | 250 °F |
| Seal Design | Bonded Design |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Pressure | 10 psi |
| Seal Application | General Purpose |
| Shaft Dia. | 342.9 mm |
| Cover/Compensation Ring/Plate Required | No |
| Housing Bore Dia. | 400.1 mm |
| Surface Speed [Nom] | 5,000 ft/min |
| Weight | 5.924 LB |
| EAN or UPC | 85311122375 |
