Find a Service Center
- Radial Shaft Seal
- 281 mm Shaft Diameter
- 331.8 mm Housing Bore Diameter
- 22.23 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Surface Speed [Nom] | 5,000 ft/min |
| Inch/Metric | Metric |
| Temperature Range [Max] | 250 °F |
| Shaft Dia. | 281 mm |
| Spring Material | Carbon Steel Garter |
| Lip Type | Non-Split |
| Seal Design | Assembled Design |
| Temperature Range [Min] | -40 °F |
| Seal Application | General Purpose |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Construction | HDS1 |
| Cover/Compensation Ring/Plate Required | No |
| Pressure | 10 psi |
| Lip Style | Internal |
| Housing Bore Dia. | 331.8 mm |
| Case Construction | Steel Case w/Inner Case |
| Lip Material | Nitrile |
| Weight | 4.831 LB |
| EAN or UPC | 85311116145 |
