Find a Service Center
- Radial Shaft Seal
- 1000 mm Shaft Diameter
- 1050 mm Housing Bore Diameter
- 23 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Lip Type | Non-Split |
| Seal Design | Molded Design |
| Surface Speed [Nom] | 5,000 ft/min |
| Construction | HDS2 |
| Pressure | 15 psi |
| Housing Bore Dia. | 1050 mm |
| Shaft Dia. | 1000 mm |
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Temperature Range [Max] | 250 °F |
| Cover/Compensation Ring/Plate Required | No |
| Temp Description | w/6 Adjustable Lugs |
| Spring Material | Carbon Steel Garter |
| Case Construction | Steel Case w/Inner Case |
| Inch/Metric | Metric |
| Temperature Range [Min] | -40 °F |
| Seal Application | General Purpose |
| Lip Material | Nitrile |
| Weight | 22.534 LB |
| EAN or UPC | 85311903370 |
