Find a Service Center
- Single Row Angular Contact Bearing, 80 mm ID x 170 mm OD x 78 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| Radial Internal Clearance Specification | Normal Clearance |
| Material | Steel |
| Seal Material | None |
| Cage Type | Metal |
| Lubricant | Oil Preservative |
| Enclosure | Open |
| Internal Design | Universal Mounting |
| icNumber | 7702945 |
| Bearing Type | Angular Contact |
| Rows of Balls | Single |
| Capacity | Standard Capacity |
| I.D. | 80 mm |
| Dynamic Load Rating | 32100 lbf |
| Static Load Rating [Max] | 27000 lbf |
| O.D. Type | Straight |
| Series | 7300P |
| Inner Ring Width | 78 mm |
| Flush Ground | Yes |
| No. in Set | Duplex Set |
| Static Load Rating | 110 kN |
| Ball Material | Steel |
| Outer Ring Width | 78 mm |
| Inch/Metric | Metric Bore |
| Preload Level | None |
| Temperature Range [Max] | 450 °F |
| O.D. | 170 mm |
| Precision Level | Standard (ABEC 1) |
| Locking Device | No Locking Device |
| Precision | Standard |
| Limiting Speed - Grease | 3600 rpm |
| Bore Type | Round Bore |
| Limiting Speed - Oil | 4700 rpm |
| Origin | Single Row Angular Contact |
| Snap Ring | No Snap Ring |
| Width | 78.000 mm |
| Seal Type | Unsealed |
| Radial Internal Clearance | Normal |
| Fillet Radius | 2 mm |
| Contact Angle | 40° |
| Cage Material | Brass/Bronze |
| Weight | 8.8 LB |
| EAN or UPC | 97741017947 |
