Find a Service Center
- Single Row Angular Contact Bearing, 130 mm ID x 230 mm OD x 40 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7200-P Light Series bearing are available in bore sizes ranging from 10 mm to 200 mm. They are used with heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| Preload Level | Light |
| Precision Level | Standard (ABEC 1) |
| Limiting Speed - Oil | 2800 rpm |
| Origin | Single Row Angular Contact |
| Bearing Type | Unmounted, Angular Contact |
| Precision | Standard |
| I.D. | 5.12 in, 130 mm |
| Outer Ring Width | 1.77 in, 45 mm |
| icNumber | 7702939 |
| Radial Internal Clearance Specification | Normal Clearance |
| No. in Set | Duplex Set |
| Limiting Speed - Grease | 1900 rpm |
| Capacity | Standard Capacity |
| O.D. Type | Cylindrical |
| Locking Device | No Locking Device |
| Cage Type | Metal |
| Snap Ring | No Snap Ring |
| Rows of Balls | Single |
| O.D. | 9.06 in, 230 mm |
| Fillet Radius | 2.5 mm |
| Width | 1.77 in, 45 mm |
| Series | 7200P |
| Material | Bearing Steel |
| Radial Internal Clearance | Normal |
| Seal Material | None |
| Contact Angle | 40 Degree |
| Inch/Metric | Metric |
| Ball Material | Steel |
| Dynamic Load Rating | 186 kN |
| Seal Type | Unsealed |
| Cage Material | Brass |
| Internal Design | Universal Mounting |
| Bore Type | Cylindrical |
| Static Load Rating | 193 kN |
| Temperature Range [Max] | 450 °F |
| Flush Ground | Yes |
| Enclosure | Open |
| Static Load Rating [Max] | 43400 lbf |
| Lubricant | Oil Preservative |
| Inner Ring Width | 1.77 in, 45 mm |
| Weight | 16.182 LB |
| EAN or UPC | 97741017107 |
